, ,

Aftermarket ATA PTX5 / ATA PTX6 / B&D Tri Trans Handset

$41.85 Incl GST

+ Free Shipping

1x Aftermarket CodeEzy ATA PTX5 / PTX6 / B&D Tri Trans Handset

Batteries Included  – Yes
Battery Type  – 23A 12V Lithium Battery
Warranty  – 1 Year

Aftermarket ATA PTX5 / ATA PTX6 / B&D Tri Trans Handset Product Features

  • Light weight
  • Four button design, allowing coding to multiple compatible garage door operators
  • Simple to program
  • Durable Casing with keyring included
  • This handset is a direct copy of the ATA PTX5 / ATA PTX6 / B&D Tri Trans handsets
  • Don’t forget to check out the Wall Mount / Visor Clip for this handset, which is available for purchase below

The Aftermarket ATA PTX5 / ATA PTX6 / B&D Tri Trans Handset is easy to use which allows you to open and close your garage door remotely, when in range of your garage door operator.

This handset is easy to code into your existing garage door operator, please see the coding instructions in the Coding Instructions tab above. If you need any assistance in coding your new garage door handset, please contact our friendly customer service team by sending an email to service@expressgarageparts.com.au 

Weight 32 g
Dimensions 80 × 40 × 20 mm

Brand

ATA

Compatible Operators

Aftermarket ATA PTX5 / ATA PTX6 / B&D Tri Trans Handset Compatibility

The aftermarket ATA PTX5 / PTX6 / B&D Tri Trans Handset is a direct copy of the ATA PTX5 / PTX6 / B&D Tri Trans handsets, which was used by a number of different manufacturers. Listed below are the brands and models that this handset is compatible with:

Compatible ATA Garage Door Operators
  • EasyRoller GDO-6v3
  • EasyRoller GDO-6v4
  • Shedmaster GDO-8v3
  • Toro GDO-10v2
  • Toro GDO-10v3
  • Hiro GDO-12
  • SecuraLift GDO-7v2
  • SecuraLift GDO-7v3
  • Enduro GDO-9v2
  • Dynamo GDO-9v3
  • Ero GDO-11v1
  • Ero GDO-11v3
  • Tempo ATS-2
  • Synchro ATS-3
Compatible ATA Gate Operators
  • NeoSlider NES-24v1
  • NeoSlider NES-24v3
  • NeoSlider NES-500
  • NeoSlider NES-800
  • Gate Controller DCB-05
  • Elite SGO-1

Compatible B&D Garage Door Operators

  • Controll-A-Door S
  • Controll-A-Door Advance
  • Controll-A-Door Prodigy
  • Controll-A-Door Power Drive
  • PanelPro SDO-4V1

Please note, this handset is not compatible with the following:

  • PTX-4 handset(433Mhz) with blue case
  • ATA Operators which still use SecuraCode 433MHz or old 27MHz
  • TX handsets without the use of a Tricode receiver card

Coding Instructions

Coding Instructions are included in the packaging when the item is purchased.

BATTERY WARNING

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN

  • Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus.
  • If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 for fast, expert advice.
  • Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened.
  • Do not use it if the compartment is not secure.
  • Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
  • Tell others about the risk associated with button batteries and how to keep their children safe.

You may also like…

  • ATA-PTX6-Handset
  • Wall-Mount-Visor-Clip-Holder-for-Aftermarket-Handset
Shopping Cart